Crushing mill

Operation principle

This machine consists of machine body ,driving device , distance adjustment device , safety device , temperature of roller adjustment device , lubrication system , emergency stop and chassis base

  the front and rear rotor are the main spare parts, through the power machine ,decelerator , under the ration certain speed , to extrude and cut sizing material from opposite direction rotating .

  the workpiece surface of roller is made of  chilled cast iron, with features as rigid and wear resistant, the two ends of roller is supported by rolling bearing . the roller is hollow, inner bore processing , heating ,cooling on average . The distance between two rollers can be adjustable in given scope . the machine is configured with safety device , in case of overloading ,the safety disc is broken in order to protect the main spare parts from damaging owing to overloading . when, pull the emergency rope of brake device (or touch switch ) ,it will brake immediately for the purpose of safety and reliability. The temperature for roller surface can be accommodated by adjustment system of roller temperature. as required. Equipped with stop pad at both ends of roller working section avoids sizing material leaking. The material holding plate is installed under the roller.The complete machine adopts integrated base to facilitate installation, adjustment and stability for transmission.